OTHER
TECH TIPS

 

 

 

SURFCAM Tech Tip

SURFCAM Network License Manager

THIS PAGE IS UNDER CONSTRUCTION

This Tech-Tip will explain how to install and configure the:-

Installing the SURFCAM Network Manager Software

Step 1

Insert the SURFCAM DVD
Click the Install Now button for the SURFCAM Network Manager
(this is the only thing you need to install)

LMS Image

Step 2

Select Language then click the Next button 

LMS Image

Step 3

Click the Next button to continue the installation

LMS Image

Step 4

Verify the installation path and click the Next button to continue

LMS Image

Step 5

SafeNet Driver installation warning, please remove your USB SURFCAM SIM before clicking the OK button. 

LMS Image

Step 6

Installing the SIM Drivers 

LMS Image

Step 7 

Select your Program Folders and click the Next button to continue 

LMS Image

Step 8 

Select the NO option, you will reboot after the next screen. 

LMS Image

Step 9 

You have completed the installation, click the close button and reboot the Server

LMS Image

Installing the Network SIM and License File

Step 10

Install the SURFCAM Network SIM on the License Server's USB port.

LMS Image

Step 11

Double clicking the License File (companyname*.SCLIC) and the SURFCAM License File Installer appears.

Clicking the Install License File Now button will prompt you to STOP the License Service.

Note the Installation Path, it should read the location where the License Service is installed.

LMS Image

Step 12

You must Stop the License Service before you can install the License File, otherwise it will not be able to overwrite the file.  DO NOT click any buttons yet, proceed to the next step.

LMS Image

Step 13

From the Start Menu select ALL PROGRAMS - SURFCAM Network Server 8.0 - Stop Server

LMS Image

Step 14

Click the Yes button to install the License File

LMS Image

Step 15

Restart the License Server, click

LMS Image

Configuring Windows Firewall on the License Server

Step 16

From the Start menu Select Control Panel, Windows Firewall

LMS Image

Step 17

Adding Exceptions

Click the Add Port button

LMS Image

Step 18

Adding Exceptions for Port 5093

  1. Name Field: Enter a user friendly name for the Exception
  2. Port Number Field: Enter 5093
  3. Port Type: Select UDP
  4. Click the OK button

LMS Image

Step 19

Adding Exception for Port 5094

  1. Name Field: Enter a user friendly name for the Exception
  2. Port Number Field: Enter 5094
  3. Port Type: Select UDP
  4. Click the OK button

LMS Image

Step 20

Click the OK button

LMS Image

Using the SURFCAM Network License Manager

Step 21

Click the Start button ALL PROGRAMS - SURFCAM Version - SURFCAM Network License Icon

The License Manager will scan your network for any License Servers and the results will be displayed

Highlight the License you want to check out and click the OK button.

License Manager

If the Create Shortcut button is grayed out, run as Administrator to enable it.

License Manager Admin

Step 22

Highlight the specific License and click the Create Shortcut button, an Icon will appear on your Desktop

Shortcut